Motorcycles/Quads These mini units were developed to prevent rust and corrosion in motorcycles. Steel frames, alloy components and heads are all protected with this unit.
Standard Vehicle System This system is a single-coupler system designed to suit all relatively new 2 wheel drive vehicles as well as older ones that are not beyond helping. As good as this product is, it is not a miracle cure for badly rusted cars. On these old cars the best we can hope for is to slow down the inevitable by around 80%.
4WD Systems The 4WD system is different from the vehicle system because it has 2 capacitive couplers that operate off 2 separate circuits. Unfortunately it is not possible to just add extra pads on to the 1 circuit.This system was designed to fully protect 4WD vehicles even when these vehicles are used for beach driving.
Heavy Duty 4WD The Heavy Duty 4WD System has four Capacitive Couplers and maintains a very strong pulse throughout the entire vehicle. Each coupler has it's own circuit from the power supply, four couplers must have four circuits to be effective, it is not just one wire and four pads.
